 | Heatseeker Heatpump
The Heatseeker heat pumps use ambient air temperatures to heat at a
lower cost and are 500% more efficient than conventional electric heaters.
FEATURES
Solid State Controls: accurately monitors your pool’s water temperature, saves energy.
Exclusive Solid State Temperature Display
Accurate electronic display eliminates need for secondary thermometer in pool.
Exclusive Direct Set Thermostat: just set the perfect temperature and Heatseker does
the rest automatically.
Internal Valving: automatically compensates for normal day-to-day changes in your pool’s
hydraulics, maximizing heat transfer efficiency.
Back-Flow Check Valves: reduce the possibility of damage from chlorinating devices.
Titanium heate exchanger
heating at lower air temperatures without additional compressor stress.
Fully Compatible with the latest pool control systems.
|
|
 | Heat Perfector Heatpump
The Heat Perfector heat pumps use ambient air temperatures to heat at a
lower cost and are 500% more efficient than conventional electric heaters.
FEATURES
Solid State Controls: accurately monitors your pool’s water temperature, saves energy.
Exclusive Solid State Temperature Display
Accurate electronic display eliminates need for secondary thermometer in pool.
Standard Dual Thermostats: allows seperate pool and spa temperature settings.
Exclusive Direct Set Thermostat: just set the perfect temperature and Heat Perfector does
the rest automatically.
Internal Valving: automatically compensates for normal day-to-day changes in your pool’s
hydraulics, maximizing heat transfer efficiency.
Back-Flow Check Valves: reduce the possibility of damage from chlorinating devices.
Exclusive Refrigerant Receiver Tank: allows larger refrigerant charge, provides more efficient
heating at lower air temperatures without additional compressor stress.
Fully Compatible with the latest pool control systems.
|
|
 | Competition heatpumps
Competition Outdoor Installation Only from poolpartmart.This heat pump is great
for the smaller pool construction and ideally suited for the above ground
swimming pools. Realistically priced, it offers great value for money.
Benefits at a glance
Suitable for Above and Inground pools
Operates down to 5.C
Famous brand compressor - energy efficient and quiet
Triple thermostats offer precise temperature control
Stainless steel Heat Exchangers
Self-diagnosis control panel monitors heat pump operations
Isolated internal electrical compartment
Reverse cycle defrost operation
OUR COST IS INCLUSIVE OF DELIVERY
|
|
 | Intex 3kw Electric Heater
New from poolpartmart the intex 3kw heater
One of the most frustrating things about owning a pool is not being able to enjoy it due to cold water. Now Intex has the solution a 3KW water heater. This external water heating unit enables you to enjoy swimming when your pool water would otherwise be too cold. A great way to extend your swimming season!
Detailed Specification
- Compatible with round Easy Set or Metal Frame pools with a 15ft diameter or less
- 220–240 Volt
- Strong durable plastic material
- Easy to connect and operate
- Water level sensor
- Easily connects to new or existing pool filter system
|
|
 | Pahlens electric spa heater
Pahlén electric heaters for spa pools and small swimming pools from poolpartmart are designed for continuous flow with a minimum pressure loss. The compact design enables installation where there is little space. The heater is made of plastic with a heating element of Incoloy 825, a high-alloy steel with excellent characteristics against aggressive water.
The heater is available in three sizes, 1,5 kW, 2,0 kW and 3,0 kW, and is delivered with an adjustable thermostat 0-45°C, overheating limit control 60°C and flow switch.
|
|
 | Hot water heat exchanger
Poolpartmart heat exchangers can be used where the swimming pool water is heated by a boiler or by solar panels.Units suitable for use with pools up to 50kW or 170,000 BTU/h are supplied with mounting brackets as standard. poolpartmart heat exchangers are also available with a thermostat pocket which enables a thermostat probe to be fitted into the end cover. This removes the need for the thermostat to be fitted into the pipework.
The heat exchanger can be mounted horizontally or vertically.
|
|
 | Solar heating
Solar heating Kit for splasher swimming pools from poolpartmart Using your pool pump, water is automatically pumped.through the solar collectors. As sun shines on the collector,the water is then heated as it moves through it.
The heated water is returned back to the pool, through your return lines.You enjoy your own heated pool
with no added cost
|
|
 | Calorex heat pumps
Heating your swimming pool with a Calorex heat pump from poolpartmart couldnot be more straightforward and economic.At a cost that won’t spoil the enjoyment you, not the weather,will be in control, ensuring your pool will always be at justthe right temperature even when the sun isn’t shining.
Heat pumps can provide up to five units of energy to the pool for every one unit paid for.
Heat pumps require no complicated gas supply, oil tanks or flues.
Heat pumps will operate from small capacity electrical supplies.
Heat pumps are easy to install, quiet in operation and as a result of their design, inherently reliable.
Heat pumps are fully automatic - all you have to do is set the thermostat to your required pool temperature. |
|
 | Phalens Electric Heaters
Pahlén compact electric heaters from poolpartmart are designed and constructed for continuous flow with the lowest possible pressure drop. The compact design allows installation where there is little space. The outer jacket and the connections are made of acid-proof stainless steel AISI 316. The heaters are supplied with a heating element of Incoloy 825, a high alloy steel with excellent characteristics against aggressive water. A variety of models are available with different combinations of overheating limit control, pressure switch, thermostat and flow switch.
|
|
 | Thermalec Heaters
Thermalec Electric Swimming Pool Heaters from poolpartmart are British made and have been established for over 30 years. Please note Thermalec heaters 7.5 - 24kw are wired for single phase but have an on site adaptor for three phase . Thermalec pool heaters are unique in that they will operate with water coming from the filter with high velocity without it striking the heating elements directly. Instead, the water is deflected by baffles, forcing it round the curved base of the heater.The patented spiral flow around the elements removes all the generated heat, minimising the risk of scale or sediment collecting within the heater.
Any air pumped from the pool is allowed to pass harmlessly around the sides of the baffles and across the top of the heater.The control thermostat is positioned away from the elements so as to sense the incoming water temperature and control the pool to within 1°C. |
|
