Pool Part MartCall our sales hotline on: 01202 571702

Shopping Basket
     
  Available In The Shop:

Extra Items Lights,Heaters Etc

Pool Part Mart > Block and Liner pools > Block and liner kits > Extra Items Lights,Heaters Etc

Hot water heat exchanger Hot water heat exchanger
Poolpartmart heat exchangers
can be used where the swimming pool
water is heated by a boiler
or by solar panels.
Units suitable for use with pools up to
50kW or 170,000 BTU/h
are supplied with mounting brackets as standard
poolpartmart heat exchangers are also available
with a thermostat pocket which enables a
thermostat probe to be fitted into the end cover.
This removes the need for the thermostat
to be fitted into the pipework.
The heat exchanger can be
mounted horizontally or vertically.
 





size selection

What size do you need


Underlay 4mm felt 2 metre wide x 25 metres Underlay 4mm felt 2 metre wide x 25 metres
Underlaying your liner pool with a kit from poolpartmart
provides a soft protected layer between the concrete
finish and the liner to help protect it from damage  



Price: £219.60 (Including VAT at 20%)



Calorex  air water heatpumps Calorex air water heatpumps
Heating your swimming pool with a Calorex heat pump
from poolpartmart couldnot be more straightforward
and economic.At a cost that won’t spoil the
enjoyment you, not the weather,will be in control,
ensuring your pool will always be at just the
right temperature even when the sun isn’t shining.
Heat pumps can provide up to five units of
energy to the pool for every one unit paid for.
Heat pumps require no complicated
gas supply, oil tanks or flues.
Heat pumps will operate from small
capacity electrical supplies.
Heat pumps are easy to install, quiet
in operation and as a result of their
design, inherently reliable.
Heat pumps are fully automatic -
all you have to do is set the thermostat
to your required pool temperature. 





size selection

What size do you need


Calorex heatpump with de frost Calorex heatpump with de frost
At discounted prices From poolpartmart
Heats your swimming pool using the sun
as its source de-frost model will give
you a longer heating season
Heating your swimming pool with
a Calorex heat pump could not
be more straightforward and economic.
At a cost that won’t spoil the enjoyment
you, not the weather,will be in control,
ensuring your pool will always be at just
the right temperature even when the
sun isn’t shining.
Heat pumps can provide up to five
units of energy to the pool for every
one unit paid for.
Heat pumps require no complicated
gas supply, oil tanks or flues.
Heat pumps will operate from small
capacity electrical supplies.
Heat pumps are easy to install,
quiet in operation and as a result
of their design, inherently reliable. 





size selection

What size do you need


Laars CE  natural gas pool heater Laars CE natural gas pool heater
Teledyne Laars Lite 2 pool heaters
with manual ignition feature an easy
to use control panel and temperature
sensor to automatically monitor pool
water temperature.
Offers an exclusive finned heat
exchanger to operate at 82 percent
efficiency, resulting in lower energy
bills and quicker pool heating.
30 percent Lighter weight gas pool
heater makes installation easier than
other manufacturer's pool equipment.
see them at poolpartmart
A natural gas fire pool heater
All gas heaters should be installed
by a C.O.R.G.I registered engineer

see more for sizing infomation  





size selection

What size do you need


Block and liner kit constuction video Block and liner kit constuction video
Video or dvd instructions on construction of block and liner swimming pools 



Price: £45.13 (Including VAT at 20%)



Underwater light set complete Underwater light set complete
This underwater light from poolpartmart
incorporates features absent from
other underwater systems. The
unique Micallef fittings at the niche
and deck box enable the installer to
fit non-standard conduit lengths.
Every light comes complete with a
factory fitted clear polycarbonate
safety cover . Also available
in blue, red and green, these can be
purchased along with a compatible
front plate to suit existing
installations .
Every light comes with a finishing
fascia ring. The liner/shutter version
clips onto the clamp plate hiding
unsightly screw heads; the concrete
version is easily fitted to the niche
surround and is designed to cover
tiling edges.
Bulb changing is now easier than
ever with combination pozidrive /
slotted screw heads, locating lugs
and high-tech nickel plated inserts.
The niche is cleverly designed to
angle the beam down by 5 degrees
which means the lights can be
positioned to accomplish the
optimum effect in the pool without
glare at the poolside.
Comprises of light,nich,dekbox and transformer

 



Price: £346.93 (Including VAT at 20%)


Pool Part Mart > Block and Liner pools > Block and liner kits > Extra Items Lights,Heaters Etc


Questions? Click here for expert help
Tearing your hair out? If you don't see what you want, contact us!
100% safe. Secure online payment
 
SecurityMetrics for PCI Compliance
 
  Quick Search

 

 
Parts and Spares. We can supply pool,spa,sauna or steamroom related items including spare parts so if you don't see what you want please contact us
Block and Liner Kits. More >
Above Ground Pools. More >
Pool Pumps. More >
We are Corgi  registered. We are also certified by The Institue Of Swimming Pool Engineers

  Contact Details

Pool Part Mart
Hours 8-00 to 17-00
(Mon - Fri)
Tel: 01202 571702
Fax: 01202 252093
E-mail:
sales@poolpartmart.co.uk


© Pool Part Mart 2006 - 2009 - www.poolpartmart.co.uk - Swimming Pools, Parts and Pool Accessories