Pool Part MartCall our sales hotline on: 01202 569751

Shopping Basket
     
  Available In The Shop:

Epoxy Paint System

Pool Part Mart > Paint > Epoxy Paint System

PoolCoating System 10

PoolCoating System 10 is a twin pack water based resin coating designed for safe and easy application in the marine, aquatic and leisure industry. PoolCoating System 10 has many advantages over conventional swimming pool paint and other traditional coatings. Once dry, PoolCoating System 10 forms a tough waterproof non-toxic barrier that is resistant to oil and most mild chemicals. PoolCoating System 10 can be applied to sand and cement render, Marbleite and glass fibre as well as numerous other hard surfaces.



Pool Coating System 10 Pool Coating System 10
Pool Coating System 10 has proven itself in the most arduous of conditions. It is the coating system of choice for many pool managers, protecting and enhancing their outdoor public swimming pools.

Pool Coating System 10 bonds so tightly to the treated surface that it resists the cracking, crazing, peeling and chipping induced by the constant stress on the pool which so many other coatings succumb to after a few years. It's also extremely effective at resisting the mottling, staining and fading that comes from constant exposure to pool chemicals. Lasting up to ten years, PoolCoating System 10 significantly reduces the number of times a pool must be drained and re-filled during its lifetime, allowing you to keep your pool open for longer than those treated with traditional swimming pool paint.

PoolCoating System 10 comes in packs of 3x 5 litre cans (2x 5 litre cans of colour and 1x 5 litre can of clear).
Can be ordered as single 5lt tin please state colour when ordering
 

Click Here For More Information



Colour Selection

Colour

colours

Coverage

Calculate the area to be coated. For example add up the area of the bottom of the pool and each of the sides. If you have surfaces such as steps, don't forget to include their area as well. If you have an irregular shaped pool, you will need to estimate the surface area to be covered.

One pack of PoolCoating System 10 will cover 30 - 40 square metres (approximately 36 - 48 square yards) with two coats of colour and one coat of clear, depending on the porosity of the surface. A newly prepared surface will take more whereas a previously coated surface will take less.

To calculate the number of packs you will require, take the total area in either square metres or square yards and divide by the appropriate amount to get the number of packs. We always recommend that the requirements are rounded up to ensure that you can finish the job successfully

For example, you have a pool that is 11m x 6m x 1.5m (length x width x depth). The area for coating is therefore 117 square metres. Divide this by 30 (using coverage of 30 square metres per pack) which comes to 3.9 packs. Round this up and place your order for 4 packs.

Application of system 10

Application of system 10
Pool Part Mart > Paint > Epoxy Paint System


Questions? Click here for expert help
Tearing your hair out? If you don't see what you want, contact us!
100% safe. Secure online payment
 
SecurityMetrics for PCI Compliance
 
  Quick Search

 

 
Parts and Spares. We can supply pool,spa,sauna or steamroom related items including spare parts so if you don't see what you want please contact us
Block and Liner Kits. More >
Above Ground Pools. More >
Pool Pumps. More >
We are Corgi registered. We are also certified by The Institue Of Swimming Pool Engineers

  Contact Details

Pool Part Mart
Hours 8-00 to 17-00
(Mon - Fri)
Tel: 01202 569751
Fax: 01202 252093
E-mail:
sales@poolpartmart.co.uk


© Pool Part Mart 2006 - 2009 - www.poolpartmart.co.uk - Swimming Pools, Parts and Pool Accessories